Ask Your Question

Bruisbe's profile - activity

2015-02-17 17:08:31 -0500 received badge  Famous Question (source)
2015-02-17 17:08:31 -0500 received badge  Notable Question (source)
2014-05-08 17:08:09 -0500 received badge  Student (source)
2014-05-08 11:23:43 -0500 received badge  Popular Question (source)
2014-05-07 16:29:45 -0500 asked a question Setting up my Fedora box to be a file server

I am currently wanting to use my linux box as my server for all of my files. I want to be able to access these files on my network from my other devices... (windows 8.1 laptop, and video files from my PS4)

I have everything set up as DHCP, however in the network tab on my laptop, I cannot find the linux box.

Any suggestions on how to acomplish this would be greatly appreciated.

Thanks in advance, Curtis

2014-05-07 15:05:00 -0500 received badge  Popular Question (source)
2014-05-07 11:37:33 -0500 answered a question Additional HDD's not showing up in Fedora 20

Thank you all for your comments back. I was expecting to see a drive on my machine similar to how Windows is set up showing each individual drive that I have available.

I am still getting used to Linux and how things run. The part that was confusing me was if I right clicked on Computer under Devices and went to the properties, it would only show 52GB as total space available. If I do the same on the /home folder it shows 3.2 TB available. Thank you all again for the help in showing me where the rest of my storage was at... :)

2014-05-07 11:33:58 -0500 received badge  Scholar (source)
2014-05-06 18:28:31 -0500 commented answer Additional HDD's not showing up in Fedora 20

Thank you for the reply. I see those and even when go to the Drives, it shows them, however I cannot format them, nor store any data to them...I also tried setting up a raid array with them and get the following errors;

Error when I try to format: Error wiping device: Command-line `wipefs -a "/dev/sdb1"' exited with non-zero exit status 1: wipefs: error: /dev/sdb1: probing initialization failed: Device or resource busy (udisks-error-quark, 0)

Error when I try to set up a RAID Array: Error opening device /dev/sda: Device or resource busy (udisks-error-quark, 0)

2014-05-06 17:16:44 -0500 asked a question HDD's not showing up in Fedora 20

Hello,

I just recently decided to move from Windows 8.1 to Fedora 20.

I have a WD 500GB Black HDD as my install HDD and 3 Toshiba 1GB drives that I used to have set up in a RAID array back when I was running Windows 7,

I formatted all of the HDD's prior to installing Fedora and installed Fedora on my 500GB Black Drive with no issues at all. The problem is that Fedora is not seeing the other 3 drives. I dont really care about setting them up in any sort of array as of right now, however I would just like to get them to be seen...

When I formatted them, I did so using the FAT system instead of NTSF. I am fairly new to Linux, so please go gentle on me.

Thanks in Advance, Curtis

The following displays when I run "sudo parted -l"

[Bruisbe@localhost ~]$ sudo parted -l Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 EFI System Partition boot 2 211MB 735MB 524MB ext4 3 735MB 1000GB 999GB lvm

Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sdb: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 1000GB 1000GB lvm

Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 1000GB 1000GB lvm

Model: ATA WDC WD5001AALS-0 (scsi) Disk /dev/sdd: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 500GB 500GB lvm

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-home: 3442GB Sector size (logical/physical): 512B/4096B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 3442GB 3442GB ext4

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-root: 53.7GB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 53.7GB 53.7GB ext4

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-swap: 3909MB Sector size (logical/physical): 512B/4096B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 3909MB 3909MB linux-swap(v1)

2014-05-06 17:14:56 -0500 asked a question Additional HDD's not showing up in Fedora 20

Hello,

I just recently decided to move from Windows 8.1 to Fedora 20.

I have a WD 500GB Black HDD as my install HDD and 3 Toshiba 1GB drives that I used to have set up in a RAID array back when I was running Windows 7,

I formatted all of the HDD's prior to installing Fedora and installed Fedora on my 500GB Black Drive with no issues at all. The problem is that Fedora is not seeing the other 3 drives. I dont really care about setting them up in any sort of array as of right now, however I would just like to get them to be seen...

When I formatted them, I did so using the FAT system instead of NTSF. I am fairly new to Linux, so please go gentle on me.

Thanks in Advance, Curtis

The following displays when I run "sudo parted -l"

[Bruisbe@localhost ~]$ sudo parted -l Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 211MB 210MB fat16 EFI System Partition boot 2 211MB 735MB 524MB ext4 3 735MB 1000GB 999GB lvm

Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sdb: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 1000GB 1000GB lvm

Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 1000GB 1000GB lvm

Model: ATA WDC WD5001AALS-0 (scsi) Disk /dev/sdd: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags:

Number Start End Size File system Name Flags 1 1049kB 500GB 500GB lvm

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-home: 3442GB Sector size (logical/physical): 512B/4096B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 3442GB 3442GB ext4

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-root: 53.7GB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 53.7GB 53.7GB ext4

Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/fedora-swap: 3909MB Sector size (logical/physical): 512B/4096B Partition Table: loop Disk Flags:

Number Start End Size File system Flags 1 0.00B 3909MB 3909MB linux-swap(v1)

2014-05-06 17:13:07 -0500 asked a question Additional HDD's not showing up in Fedora 20

Hello,

I just recently decided to move from Windows 8.1 to Fedora 20.

I have a WD 500GB Black HDD as my install HDD and 3 Toshiba 1GB drives that I used to have set up in a RAID array back when I was running Windows 7,

I formatted all of the HDD's prior to installing Fedora and installed Fedora on my 500GB Black Drive with no issues at all. The problem is that Fedora is not seeing the other 3 drives. I dont really care about setting them up in any sort of array as of right now, however I would just like to get them to be seen...

When I formatted them, I did so using the FAT system instead of NTSF. I am fairly new to Linux, so please go gentle on me.

Thanks in Advance, Curtis

The following displays when I run "sudo parted -l"

[Bruisbe@localhost ~]$ sudo parted -l
Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size   File system  Name                  Flags
 1      1049kB  211MB   210MB  fat16        EFI System Partition  boot
 2      211MB   735MB   524MB  ext4
 3      735MB   1000GB  999GB                                     lvm


Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sdb: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size    File system  Name  Flags
 1      1049kB  1000GB  1000GB                     lvm


Model: ATA ST1000DM003-1CH1 (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size    File system  Name  Flags
 1      1049kB  1000GB  1000GB                     lvm


Model: ATA WDC WD5001AALS-0 (scsi)
Disk /dev/sdd: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: 

Number  Start   End    Size   File system  Name  Flags
 1      1049kB  500GB  500GB                     lvm


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/fedora-home: 3442GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Disk Flags: 

Number  Start  End     Size    File system  Flags
 1      0.00B  3442GB  3442GB  ext4


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/fedora-root: 53.7GB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Disk Flags: 

Number  Start  End     Size    File system  Flags
 1      0.00B  53.7GB  53.7GB  ext4


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/fedora-swap: 3909MB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Disk Flags: 

Number  Start  End     Size    File system     Flags
 1      0.00B  3909MB  3909MB  linux-swap(v1)
2014-05-06 17:09:09 -0500 received badge  Notable Question (source)
2014-02-22 20:44:35 -0500 received badge  Popular Question (source)
2014-02-16 07:48:07 -0500 asked a question Additional HDD's not showing up in Fedora 20

Hello,

I just recently decided to move from Windows 8.1 to Fedora 20.

I have a WD 500GB Black HDD as my install HDD and 3 Toshiba 1GB drives that I used to have set up in a RAID array back when I was running Windows 7,

I formatted all of the HDD's prior to installing Fedora and installed Fedora on my 500GB Black Drive with no issues at all. The problem is that Fedora is not seeing the other 3 drives. I dont really care about setting them up in any sort of array as of right now, however I would just like to get them to be seen...

When I formatted them, I did so using the FAT system instead of NTSF. I am fairly new to Linux, so please go gentle on me.

Thanks in Advance, Curtis