Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

Kernel 3.9.3 won't boot

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.

Kernel 3.9.3 won't boot

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.

Edit: journalctl output from the bootable kernel.

Kernel 3.9.3 4.9.3 won't boot

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.

Edit: journalctl output from the bootable kernel.

Kernel 4.9.3 won't boot

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.

Edit: journalctl output from the bootable kernel.kernel. One more info: I'm using UEFI Secure Boot.

Kernel 4.9.3 won't boot

Edit: Important info

I managed to access the log from the failed boot with journalctl -x -b -1. I suppose the following lines are responsible for the problem:

sty 18 16:53:33 desktop systemd[1]: Mounting /boot/efi... 
sty 18 16:53:33 desktop mount[631]: mount: nieznany typ systemu plików 'vfat'
sty 18 16:53:33 desktop systemd[1]: boot-efi.mount: Mount process exited, code=exited status=32
sty 18 16:53:33 desktop systemd[1]: Failed to mount /boot/efi.

The second line says: unknown filesystem type 'vfat'.

Background info: I have a dual boot Fedora 25 / Windows 10 install with UEFI secure boot enabled.

The original post

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.

Edit: journalctl output from the bootable kernel. One more info: I'm using UEFI Secure Boot.

Kernel 4.9.3 won't boot

Edit: Important info

I managed to access the log from the failed boot with journalctl -x -b -1. I suppose the following lines are responsible for the problem:

sty 18 16:53:33 desktop systemd[1]: Mounting /boot/efi... 
sty 18 16:53:33 desktop mount[631]: mount: nieznany typ systemu plików 'vfat'
sty 18 16:53:33 desktop systemd[1]: boot-efi.mount: Mount process exited, code=exited status=32
sty 18 16:53:33 desktop systemd[1]: Failed to mount /boot/efi.

The second line says: unknown filesystem type 'vfat'.

Background info: I have a dual boot Fedora 25 / Windows 10 install with UEFI secure boot enabled.enabled. The boot partition is of type FAT (because of Windows as far as I know).

The original post

I have just upgraded to kernel 4.9.3 on Fedora 25. At boot time, I get a bunch of ACPI errors (see the attachment) and a message that informs me that I'm in "emergency mode" and asks to hit Enter to continue. If I hit Enter, the same message pops out once more and nothing other happens.

A bit of info about my hardware:

$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
01:00.1 Audio device: NVIDIA Corporation Device 10f1 (rev a1)
02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

The screen I get at boot

Edit: kernel 4.8 works without problems.