How to troubleshoot Bluetooth headset issue

asked 2016-01-04 12:48:13 -0500

joakime gravatar image

updated 2016-01-04 13:04:44 -0500

I have a Logitech H600 bluetooth (and its non-bluetooth native connection / usb-dongle thing).

It was working fine in this hardware setup in Fedora 20, but after upgrade to Fedora 23, it stopped working.

The device is found in the usb list

$ lsusb | grep H600
Bus 005 Device 003: ID 046d:0a29 Logitech, Inc. H600 [Wireless Headset]

And the module listings

$ lsmod | grep -E "(snd|usb|sound|audio)"
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    86016  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_intel          36864  7
snd_usb_audio         176128  5
snd_hda_codec         126976  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           61440  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_usbmidi_lib        36864  1 snd_usb_audio
snd_hwdep              16384  2 snd_usb_audio,snd_hda_codec
snd_rawmidi            32768  1 snd_usbmidi_lib
snd_seq                69632  0
snd_seq_device         16384  2 snd_seq,snd_rawmidi
snd_pcm               114688  6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_timer              32768  3 snd_pcm,snd_seq
snd                    77824  35 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
usb_storage            65536  2 uas

It even shows up in the list of devices in the gnome sound panel. However selecting it as output or input results in no success (no output in testing mode, in browser/youtube, or in application/brasero).

One quirk in the gnome sound panel is that if I select the normal on-board sound first, then test, then select the H600 and then test, I get results, but not from the H600, the gnome sound panel thinks i'm using the H600, but I still get output from my normal speaker / microphone setup.

In Fedora 20, if I had the headset disconnected (turned off), the sound would be through my motherboard provided line out, and the microphone would be on my attached logictech webcam. But as soon as I turned on the H600, and heard the connect beep the output would be at the H600, and the input would be at the H600.

I'm attempting to get to the same setup, but in Fedora 23.

How would I go about troubleshooting this?

edit retag flag offensive close merge delete