# Revision history [back]

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

# grub2-install /dev/sda
# grub2-mkconfig -o /boot/grub2/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

# grub2-install /dev/sda
# grub2-mkconfig -o /boot/grub2/grub.cfg
/boot/grub2/grub.cfg
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

Check the disk status.
# grub2-install fdisk /dev/sda
# fdisk /dev/sdb

# grub2-mkconfig -o /boot/grub2/grub.cfg
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

Check the disk status.
status. [fdisk]  p Enter  q Enter
# fdisk /dev/sda
# fdisk /dev/sdb

# grub2-mkconfig -o /boot/grub2/grub.cfg
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

Check the disk status. [fdisk] [fdisk /dev/sdX]  p Enter  q Enter
# fdisk /dev/sda
# fdisk /dev/sdb

# grub2-mkconfig -o /boot/grub2/grub.cfg
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

The first time you boot up, grub2 will appear on your first hard disk, so you should check the disk for confirmation and status. If the grub values are modified and set incorrectly, serious problems may occur.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

Check the disk status. [fdisk /dev/sdX]  p Enter  q Enter
# fdisk /dev/sda
# fdisk /dev/sdb

# grub2-mkconfig -o /boot/grub2/grub.cfg
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg


Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]

 # grub2-install /dev/sda


if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process

After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further.

The first time you boot up, grub2 will appear on your first hard disk, so you should check the disk for confirmation and status. If the grub values are modified and set incorrectly, serious problems may occur.

Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows:

First, grub2 will work on the first hard disk without changing the state set in the BIOS.

[Case1. 1Disk - 2 OS   or   2Disk 2 OS]

OS]  Check the disk status. [fdisk /dev/sdX] p Enter  q Enter
# fdisk /dev/sda
/dev/sda             [MS-Windows System]
# fdisk /dev/sdb

/dev/sdb             [Linux- Fedora System]
or
# fdisk /dev/sda1            [MS-Windows System]
# fdisk /dev/sda2            [Linux- Fedora System]
[Case 2. grub2 update and re-install Disk]  # grub2-mkconfig -o /boot/grub2/grub.cfg
or
or
# grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ]  # grub2-install /dev/sda
if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further. 

 8 No.8 Revision updated 2019-01-02 04:22:19 -0500 The first time you boot up, grub2 will appear on your first hard disk, so you should check the disk for confirmation and status. If the grub values are modified and set incorrectly, serious problems may occur. Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows: First, grub2 will work on the first hard disk without changing the state set in the BIOS. [Case1. 1Disk - 2 OS or 2Disk 2 OS] Check the disk status. [fdisk /dev/sdX] p Enter q Enter # fdisk /dev/sda [MS-Windows System] # fdisk /dev/sdb [Linux- Fedora System] or # fdisk /dev/sda1 [MS-Windows System] # fdisk /dev/sda2 [Linux- Fedora System] [Case 2. grub2 update and re-install Disk] # grub2-mkconfig -o /boot/grub2/grub.cfg or # grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ] # grub2-install /dev/sda Do NOT run grub2-install if you intend to boot in UEFI mode. [ @villykruse ] if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further. 9 No.9 Revision updated 2019-01-02 04:49:23 -0500 The first time you boot up, grub2 will appear on your first hard disk, so you should check the disk for confirmation and status. If the grub values are modified and set incorrectly, serious problems may occur. Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows: First, grub2 will work on the first hard disk without changing the state set in the BIOS. [Case1. 1Disk - 2 OS or 2Disk 2 OS] Check the disk status. [fdisk /dev/sdX] p Enter q Enter # fdisk /dev/sda [MS-Windows System] # fdisk /dev/sdb [Linux- Fedora System] or # fdisk /dev/sda1 [MS-Windows System] # fdisk /dev/sda2 [Linux- Fedora System] [Case 2. grub2 update and re-install Disk]for MBR(Master Boot Record) System] # grub2-mkconfig -o /boot/grub2/grub.cfg or # grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ] # grub2-install /dev/sda Do NOT run grub2-install if you intend to boot in UEFI mode. [ @villykruse ]]. Use disk to distinguish between mbr and gpt. If UEFI is supported, check gpt when checking the fdisk status. if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further. 10 No.10 Revision updated 2019-01-02 04:57:11 -0500 The first time you boot up, grub2 will appear on your first hard disk, so you should check the disk for confirmation and status. If the grub values are modified and set incorrectly, serious problems may occur. Changing from BIOS Legacy Mode to UEFI will cause boot problems, and will force booting of GRUB2 on a system running in UEFI mode. Perhaps if you have two disks and you use a different operating system, use grub2 on Linux to update the boot state as follows: First, grub2 will work on the first hard disk without changing the state set in the BIOS. [Case1. 1Disk - 2 OS or 2Disk 2 OS] Check the disk status. [fdisk /dev/sdX] p Enter q Enter # fdisk /dev/sda [MS-Windows System] # fdisk /dev/sdb [Linux- Fedora System] or # fdisk /dev/sda1 [MS-Windows System] # fdisk /dev/sda2 [Linux- Fedora System] [Case 2. grub2 update and re-install for MBR(Master Boot Record) System] # grub2-mkconfig -o /boot/grub2/grub.cfg or # grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg Sometimes the location of grub.cfg may be different. [/boot/efi/EFI/fedora/grub.cfg ] # grub2-install /dev/sda Do NOT run grub2-install if you intend to boot in UEFI mode. [ @villykruse ]. Use disk to distinguish between mbr and gpt. If UEFI is supported, check gpt when checking the fdisk status. if the boot settings are correct, you can get new the boot status and will be update for grub2 in boot process After boot linux, logging in to linux, update grub2 with the command, and let me know the progress so that you can better troubleshoot the problem. Please let me know your results and i will be update further. 


 Ask Fedora is community maintained and Red Hat or Fedora Project is not responsible for content. Content on this site is licensed under a CC-BY-SA 3.0 license. about | faq | help | privacy policy | terms of service Powered by Askbot version 0.10.2 Please note: Ask Fedora requires javascript to work properly, please enable javascript in your browser, here is how //IE fix to hide the red margin var noscript = document.getElementsByTagName('noscript')[0]; noscript.style.padding = '0px'; noscript.style.backgroundColor = 'transparent'; askbot['urls']['mark_read_message'] = '/en/s/messages/markread/'; askbot['urls']['get_tags_by_wildcard'] = '/en/s/get-tags-by-wildcard/'; askbot['urls']['get_tag_list'] = '/en/s/get-tag-list/'; askbot['urls']['follow_user'] = '/followit/follow/user/{{userId}}/'; askbot['urls']['unfollow_user'] = '/followit/unfollow/user/{{userId}}/'; askbot['urls']['user_signin'] = '/en/account/signin/'; askbot['urls']['getEditor'] = '/en/s/get-editor/'; askbot['urls']['translateUrl'] = '/en/s/translate-url/'; askbot['urls']['apiGetQuestions'] = '/en/s/api/get_questions/'; askbot['urls']['ask'] = '/en/questions/ask/'; askbot['urls']['questions'] = '/en/questions/'; askbot['settings']['groupsEnabled'] = false; askbot['settings']['static_url'] = '/m/'; askbot['settings']['minSearchWordLength'] = 3; askbot['settings']['mathjaxEnabled'] = false; askbot['settings']['sharingSuffixText'] = '#AskFedora'; askbot['settings']['errorPlacement'] = 'after-label'; askbot['data']['maxCommentLength'] = 600; askbot['settings']['editorType'] = 'markdown'; askbot['settings']['commentsEditorType'] = 'rich\u002Dtext'; askbot['messages']['askYourQuestion'] = 'Ask Your Question'; askbot['messages']['acceptOwnAnswer'] = 'accept or unaccept your own answer'; askbot['messages']['followQuestions'] = 'follow questions'; askbot['settings']['allowedUploadFileTypes'] = [ "jpg", "jpeg", "gif", "bmp", "png", "tiff" ]; askbot['data']['haveFlashNotifications'] = true; askbot['data']['activeTab'] = 'questions'; askbot['settings']['csrfCookieName'] = 'af_csrftoken'; askbot['data']['searchUrl'] = ''; /*<![CDATA[*/ $('.mceStatusbar').remove();//a hack to remove the tinyMCE status bar$(document).ready(function(){ // focus input on the search bar endcomment var activeTab = askbot['data']['activeTab']; if (inArray(activeTab, ['users', 'questions', 'tags', 'badges'])) { var searchInput = $('#keywords'); } else if (activeTab === 'ask') { var searchInput =$('#id_title'); } else { var searchInput = undefined; animateHashes(); } var wasScrolled = $('#scroll-mem').val(); if (searchInput && !wasScrolled) { searchInput.focus(); putCursorAtEnd(searchInput); } var haveFullTextSearchTab = inArray(activeTab, ['questions', 'badges', 'ask']); var haveUserProfilePage =$('body').hasClass('user-profile-page'); if ((haveUserProfilePage || haveFullTextSearchTab) && searchInput && searchInput.length) { var search = new FullTextSearch(); askbot['controllers'] = askbot['controllers'] || {}; askbot['controllers']['fullTextSearch'] = search; search.setSearchUrl(askbot['data']['searchUrl']); if (activeTab === 'ask') { search.setAskButtonEnabled(false); } search.decorate(searchInput); } else if (activeTab === 'tags') { var search = new TagSearch(); search.decorate(searchInput); } if (askbot['data']['userIsAdminOrMod']) { $('body').addClass('admin'); } if (askbot['settings']['groupsEnabled']) { askbot['urls']['add_group'] = "/en/s/add-group/"; var group_dropdown = new GroupDropdown();$('.groups-dropdown').append(group_dropdown.getElement()); } var userRep = $('#userToolsNav .reputation'); if (userRep.length) { var showPermsTrigger = new ShowPermsTrigger(); showPermsTrigger.decorate(userRep); } }); if (askbot['data']['haveFlashNotifications']) {$('#validate_email_alert').click(function(){notify.close(true)}) notify.show(); } var langNav = $('.lang-nav'); if (langNav.length) { var nav = new LangNav(); nav.decorate(langNav); } /*]]>*/ //todo - take this out into .js file$(document).ready(function(){ $('div.revision div[id^=rev-header-]').bind('click', function(){ var revId = this.id.substr(11); toggleRev(revId); }); lanai.highlightSyntax(); }); function toggleRev(id) { var arrow =$("#rev-arrow-" + id); var visible = arrow.attr("src").indexOf("hide") > -1; if (visible) { var image_path = '/m/default/media/images/expander-arrow-show.gif?v=6'; } else { var image_path = '/m/default/media/images/expander-arrow-hide.gif?v=6'; } image_path = image_path + "?v=6"; arrow.attr("src", image_path); \$("#rev-body-" + id).slideToggle("fast"); } for (url_name in askbot['urls']){ askbot['urls'][url_name] = cleanUrl(askbot['urls'][url_name]); }