Ask Your Question

Revision history [back]

USB ports stops working on Macbook pro running FC24

Hello All,

I have FC24 running smoothly on FC24 for sometime now (6 months +)

Since last few weeks I have been facing issue that the connected USB devices (either on USB3 hub or directly to laptop) disconnect after sometime. I think I started facing this issue after upgrading kernel to 4.9.x (11,12,13 all exhibit the same issue)

Please see the following uname and dmesg output:

[guru@guru-laptop ~]$ uname -a
Linux guru-laptop 4.9.13-100.fc24.x86_64 #1 SMP Mon Feb 27 16:57:22 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
[guru@guru-laptop ~]$ 
[guru@guru-laptop ~]$ 
[guru@guru-laptop ~]$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[    0.000000] Linux version 4.9.13-100.fc24.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Mon Feb 27 16:57:22 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.13-100.fc24.x86_64 root=/dev/mapper/fedora_guru--laptop-root ro rd.lvm.lv=fedora_guru-laptop/root rd.lvm.lv=fedora_guru-laptop/swap rhgb quiet LANG=en_AU.UTF-8
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000088d11fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088d12000-0x0000000088d52fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000088d53000-0x0000000088d66fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088d67000-0x0000000088d8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000088d8f000-0x0000000088e3bfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088e3c000-0x0000000088e8efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000088e8f000-0x0000000088ed6fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088ed7000-0x0000000088efefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000088eff000-0x0000000088f91fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088f92000-0x0000000088ffefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000088fff000-0x0000000088ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000089000000-0x000000008f9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x84d2d190-0x84d3d1cf] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040005000-0x0000000084d2d18f] usable
[    0.000000] reserve setup_data: [mem 0x0000000084d2d190-0x0000000084d3d1cf] usable
[    0.000000] reserve setup_data: [mem 0x0000000084d3d1d0-0x0000000088d11fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088d12000-0x0000000088d52fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000088d53000-0x0000000088d66fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088d67000-0x0000000088d8efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x0000000088d8f000-0x0000000088e3bfff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088e3c000-0x0000000088e8efff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000088e8f000-0x0000000088ed6fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088ed7000-0x0000000088efefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000088eff000-0x0000000088f91fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000088f92000-0x0000000088ffefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000088fff000-0x0000000088ffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000089000000-0x000000008f9fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026f5fffff] usable
[    0.000000] efi: EFI v1.10 by Apple
[    0.000000] efi:  ACPI=0x88d8e000  ACPI 2.0=0x88d8e014  SMBIOS=0x88d19000 
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Apple Inc. MacBookPro10,2/Mac-AFD8A9D944EA4843, BIOS MBP102.88Z.0106.B0A.1509130955 09/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 0A0000000 mask FE0000000 uncachable
[    0.000000]   2 base 090000000 mask FF0000000 uncachable
[    0.000000]   3 base 08C000000 mask FFC000000 uncachable
[    0.000000]   4 base 08A000000 mask FFE000000 uncachable
[    0.000000]   5 base 089000000 mask FFF000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x89000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff911ac0099000] 99000 size 24576
[    0.000000] BRK [0x2a262000, 0x2a262fff] PGTABLE
[    0.000000] BRK [0x2a263000, 0x2a263fff] PGTABLE
[    0.000000] BRK [0x2a264000, 0x2a264fff] PGTABLE
[    0.000000] BRK [0x2a265000, 0x2a265fff] PGTABLE
[    0.000000] BRK [0x2a266000, 0x2a266fff] PGTABLE
[    0.000000] BRK [0x2a267000, 0x2a267fff] PGTABLE
[    0.000000] BRK [0x2a268000, 0x2a268fff] PGTABLE
[    0.000000] BRK [0x2a269000, 0x2a269fff] PGTABLE
[    0.000000] BRK [0x2a26a000, 0x2a26afff] PGTABLE
[    0.000000] BRK [0x2a26b000, 0x2a26bfff] PGTABLE
[    0.000000] BRK [0x2a26c000, 0x2a26cfff] PGTABLE
[    0.000000] BRK [0x2a26d000, 0x2a26dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3ed06000-0x3fffafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000088D8E014 000024 (v02 APPLE )
[    0.000000] ACPI: XSDT 0x0000000088D8E1C0 0000BC (v01 APPLE  Apple00  00000000      01000013)
[    0.000000] ACPI: FACP 0x0000000088D8C000 0000F4 (v04 APPLE  Apple00  00000000 Loki 0000005F)
[    0.000000] ACPI: DSDT 0x0000000088D82000 004C53 (v03 APPLE  MacBookP 00100002 INTL 20100915)
[    0.000000] ACPI: FACS 0x0000000088D1C000 000040
[    0.000000] ACPI: FACS 0x0000000088D1C000 000040
[    0.000000] ACPI: HPET 0x0000000088D8B000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 0x0000000088D8A000 0000BC (v02 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 0x0000000088D88000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 0x0000000088D87000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 0x0000000088D7F000 00053A (v01 APPLE  SataAhci 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D7E000 000024 (v01 APPLE  SmcDppt  00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D79000 000D77 (v01 APPLE  UsbPpt   00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D77000 000159 (v02 APPLE  IGHda    00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D75000 000032 (v01 APPLE  SsdtS3   00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D73000 0015ED (v02 APPLE  SsdtIGPU 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D6D000 001EA8 (v01 APPLE  TbtPEG11 00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D6C000 0000B8 (v01 APPLE  Sdxc     00001000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D6B000 000629 (v01 PmRef  Cpu0Ist  00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D6A000 000B3D (v01 PmRef  CpuPm    00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D69000 000315 (v01 PmRef  Cpu0Tst  00003000 INTL 20100915)
[    0.000000] ACPI: SSDT 0x0000000088D68000 00037A (v01 PmRef  ApTst    00003000 INTL 20100915)
[    0.000000] ACPI: DMAR 0x0000000088D67000 000088 (v01 APPLE  IVB      00000001 AAPL 00000001)
[    0.000000] ACPI: MCFG 0x0000000088D89000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26f5e6000-0x26f5fcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008dfff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x0000000088d11fff]
[    0.000000]   node   0: [mem 0x0000000088d53000-0x0000000088d66fff]
[    0.000000]   node   0: [mem 0x0000000088d8f000-0x0000000088e3bfff]
[    0.000000]   node   0: [mem 0x0000000088e8f000-0x0000000088ed6fff]
[    0.000000]   node   0: [mem 0x0000000088eff000-0x0000000088f91fff]
[    0.000000]   node   0: [mem 0x0000000088fff000-0x0000000088ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
[    0.000000] On node 0 totalpages: 2064971
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8691 pages used for memmap
[    0.000000]   DMA32 zone: 556206 pages, LIFO batch:31
[    0.000000]   Normal zone: 23512 pages used for memmap
[    0.000000]   Normal zone: 1504768 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics memory at 0x0000000089a00000-0x000000008f9fffff
[    0.000000] Resetting Apple AirPort card (left enabled by EFI)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0x84d2d000-0x84d2dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x84d3d000-0x84d3dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x88d12000-0x88d52fff]
[    0.000000] PM: Registered nosave memory: [mem 0x88d67000-0x88d8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x88e3c000-0x88e8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x88ed7000-0x88efefff]
[    0.000000] PM: Registered nosave memory: [mem 0x88f92000-0x88ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x89000000-0x8f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
[    0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff911d2f200000 s108504 r8192 d30760 u524288
[    0.000000] pcpu-alloc: s108504 r8192 d30760 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2032682
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.13-100.fc24.x86_64 root=/dev/mapper/fedora_guru--laptop-root ro rd.lvm.lv=fedora_guru-laptop/root rd.lvm.lv=fedora_guru-laptop/swap rhgb quiet LANG=en_AU.UTF-8
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Memory: 7829280K/8259884K available (8331K kernel code, 1422K rwdata, 3396K rodata, 1688K init, 1332K bss, 430604K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:65792 nr_irqs:456 16
[    0.000000]  Offload RCU callbacks from all CPUs
[    0.000000]  Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2494.318 MHz processor
[    0.000035] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.63 BogoMIPS (lpj=2494318)
[    0.000037] pid_max: default: 32768 minimum: 301
[    0.000051] ACPI: Core revision 20160831
[    0.006102] ACPI: 13 ACPI AML tables successfully acquired and loaded
[    0.022645] Security Framework initialized
[    0.022647] Yama: becoming mindful.
[    0.022650] SELinux:  Initializing.
[    0.022667] SELinux:  Starting in permissive mode
[    0.023146] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.025152] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.026051] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.026060] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.026316] CPU: Physical Processor ID: 0
[    0.026317] CPU: Processor Core ID: 0
[    0.026323] mce: CPU supports 7 MCE banks
[    0.026331] CPU0: Thermal monitoring enabled (TM1)
[    0.026339] process: using mwait in idle threads
[    0.026342] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.026343] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.026784] Freeing SMP alternatives memory: 32K (ffffffff8310b000 - ffffffff83113000)
[    0.034049] ftrace: allocating 31120 entries in 122 pages
[    0.048845] smpboot: Max logical packages: 2
[    0.048857] DMAR: Host address width 36
[    0.048858] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.048864] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.048864] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.048870] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.048871] DMAR: RMRR base: 0x00000089800000 end: 0x0000008f9fffff
[    0.048873] DMAR-IR: IOAPIC id 0 under DRHD base  0xfed91000 IOMMU 1
[    0.048873] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.048874] DMAR-IR: [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
[    0.048879] DMAR-IR: Not enabling interrupt remapping
[    0.048880] DMAR-IR: Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
[    0.048953] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.049410] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.059419] TSC deadline timer enabled
[    0.059422] smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.059426] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.059450] ... version:                3
[    0.059450] ... bit width:              48
[    0.059451] ... generic registers:      4
[    0.059451] ... value mask:             0000ffffffffffff
[    0.059452] ... max period:             00007fffffffffff
[    0.059452] ... fixed-purpose events:   3
[    0.059453] ... event mask:             000000070000000f
[    0.060147] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.060254] x86: Booting SMP configuration:
[    0.060255] .... node  #0, CPUs:      #1 #2 #3
[    0.246700] x86: Booted up 1 node, 4 CPUs
[    0.246702] smpboot: Total of 4 processors activated (19968.14 BogoMIPS)
[    0.249869] devtmpfs: initialized
[    0.249927] x86/mm: Memory block size: 128MB
[    0.252889] PM: Registering ACPI NVS region [mem 0x88d12000-0x88d52fff] (266240 bytes)
[    0.252941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.252951] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.253000] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.253001] pinctrl core: initialized pinctrl subsystem
[    0.253045] RTC time:  6:54:31, date: 03/08/17
[    0.253129] NET: Registered protocol family 16
[    0.254534] cpuidle: using governor menu
[    0.254609] ACPI: bus type PCI registered
[    0.254611] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.254678] PCI: MMCONFIG for domain 0000 [bus 00-9a] at [mem 0xe0000000-0xe9afffff] (base 0xe0000000)
[    0.254680] PCI: not using MMCONFIG
[    0.254681] PCI: Using configuration type 1 for base access
[    0.254733] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.257650] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.257866] ACPI: Disabled all _OSI OS vendors
[    0.257867] ACPI: Added _OSI(Module Device)
[    0.257867] ACPI: Added _OSI(Processor Device)
[    0.257868] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.257869] ACPI: Added _OSI(Processor Aggregator Device)
[    0.257870] ACPI: Added _OSI(Darwin)
[    0.257875] ACPI : EC: EC started
[    0.275747] ACPI: \: Used as first EC
[    0.275748] ACPI: \: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.275749] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.278321] ACPI: BIOS _OSI(Darwin) query honored via DMI
[    0.279559] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.279897] ACPI: Dynamic OEM Table Load:
[    0.279906] ACPI: SSDT 0xFFFF911D255DC000 0008AD (v01 PmRef  Cpu0Cst  00003001 INTL 20100915)
[    0.280258] ACPI: Dynamic OEM Table Load:
[    0.280266] ACPI: SSDT 0xFFFF911D255FF800 0003A4 (v01 PmRef  ApIst    00003000 INTL 20100915)
[    0.280523] ACPI: Dynamic OEM Table Load:
[    0.280528] ACPI: SSDT 0xFFFF911D25626200 000119 (v01 PmRef  ApCst    00003000 INTL 20100915)
[    0.281261] ACPI : EC: EC stopped
[    0.281262] ACPI : EC: EC started
[    0.305690] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.305691] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.305692] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.305693] ACPI: Interpreter enabled
[    0.305711] ACPI: (supports S0 S3 S4 S5)
[    0.305711] ACPI: Using IOAPIC for interrupt routing
[    0.305738] PCI: MMCONFIG for domain 0000 [bus 00-9a] at [mem 0xe0000000-0xe9afffff] (base 0xe0000000)
[    0.306155] PCI: MMCONFIG at [mem 0xe0000000-0xe9afffff] reserved in ACPI motherboard resources
[    0.306167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.342202] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.342205] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[    0.342216] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9a] only partially covers this bridge
[    0.342431] PCI host bridge to bus 0000:00
[    0.342433] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.342434] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.342435] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.342436] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.342437] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.342438] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.342439] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.342440] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.342441] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.342442] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.342443] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.342444] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.342445] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.342446] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.342447] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.342448] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.342449] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff window]
[    0.342450] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.342451] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.342458] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.342554] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.342631] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.342676] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.342707] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[    0.342740] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.342771] pci 0000:00:01.1: System wakeup disabled by ACPI
[    0.342809] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.342818] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
[    0.342823] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.342826] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.342929] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.342948] pci 0000:00:14.0: reg 0x10: [mem 0xa0600000-0xa060ffff 64bit]
[    0.343007] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.343077] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.343117] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.343139] pci 0000:00:16.0: reg 0x10: [mem 0xa0617100-0xa061710f 64bit]
[    0.343214] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.343289] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.343307] pci 0000:00:1a.0: reg 0x10: [mem 0xa0616c00-0xa0616fff]
[    0.343391] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.343457] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.343494] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.343510] pci 0000:00:1b.0: reg 0x10: [mem 0xa0610000-0xa0613fff 64bit]
[    0.343581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.343631] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.343671] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.343800] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.343845] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.343889] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.344012] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.344059] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.344099] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.344117] pci 0000:00:1d.0: reg 0x10: [mem 0xa0616800-0xa0616bff]
[    0.344201] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.344270] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.344308] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[    0.344472] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.344487] pci 0000:00:1f.2: reg 0x10: [io  0x2098-0x209f]
[    0.344494] pci 0000:00:1f.2: reg 0x14: [io  0x20bc-0x20bf]
[    0.344501] pci 0000:00:1f.2: reg 0x18: [io  0x2090-0x2097]
[    0.344509] pci 0000:00:1f.2: reg 0x1c: [io  0x20b8-0x20bb]
[    0.344517] pci 0000:00:1f.2: reg 0x20: [io  0x2060-0x207f]
[    0.344525] pci 0000:00:1f.2: reg 0x24: [mem 0xa0616000-0xa06167ff]
[    0.344566] pci 0000:00:1f.2: PME# supported from D3hot
[    0.344628] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.344644] pci 0000:00:1f.3: reg 0x10: [mem 0xa0617000-0xa06170ff 64bit]
[    0.344664] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.344784] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.344839] pci 0000:04:00.0: [8086:1547] type 01 class 0x060400
[    0.344902] pci 0000:04:00.0: supports D1 D2
[    0.344903] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.347754] pci 0000:00:01.1: PCI bridge to [bus 04-9a]
[    0.347758] pci 0000:00:01.1:   bridge window [io  0x3000-0x5fff]
[    0.347762] pci 0000:00:01.1:   bridge window [mem 0xa0700000-0xac7fffff]
[    0.347776] pci 0000:00:01.1:   bridge window [mem 0xac800000-0xb87fffff 64bit pref]
[    0.347886] pci 0000:05:00.0: [8086:1547] type 01 class 0x060400
[    0.347955] pci 0000:05:00.0: supports D1 D2
[    0.347956] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348025] pci 0000:05:03.0: [8086:1547] type 01 class 0x060400
[    0.348089] pci 0000:05:03.0: supports D1 D2
[    0.348090] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348156] pci 0000:05:04.0: [8086:1547] type 01 class 0x060400
[    0.348219] pci 0000:05:04.0: supports D1 D2
[    0.348220] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348285] pci 0000:05:05.0: [8086:1547] type 01 class 0x060400
[    0.348349] pci 0000:05:05.0: supports D1 D2
[    0.348349] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348415] pci 0000:05:06.0: [8086:1547] type 01 class 0x060400
[    0.348478] pci 0000:05:06.0: supports D1 D2
[    0.348479] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.348557] pci 0000:04:00.0: PCI bridge to [bus 05-6a]
[    0.348561] pci 0000:04:00.0:   bridge window [io  0x3000-0x4fff]
[    0.348563] pci 0000:04:00.0:   bridge window [mem 0xa0700000-0xa87fffff]
[    0.348567] pci 0000:04:00.0:   bridge window [mem 0xac800000-0xb47fffff 64bit pref]
[    0.348614] acpiphp: Slot [1] registered
[    0.348630] pci 0000:06:00.0: [8086:1547] type 00 class 0x088000
[    0.348644] pci 0000:06:00.0: reg 0x10: [mem 0xa0700000-0xa073ffff]
[    0.348653] pci 0000:06:00.0: reg 0x14: [mem 0xa0740000-0xa0740fff]
[    0.348765] pci 0000:06:00.0: supports D1 D2
[    0.348766] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.351770] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.351789] pci 0000:05:00.0:   bridge window [mem 0xa0700000-0xa07fffff]
[    0.351854] pci 0000:05:03.0: PCI bridge to [bus 07-37]
[    0.351859] pci 0000:05:03.0:   bridge window [io  0x3000-0x3fff]
[    0.351861] pci 0000:05:03.0:   bridge window [mem 0xa0800000-0xa47fffff]
[    0.351865] pci 0000:05:03.0:   bridge window [mem 0xac800000-0xb07fffff 64bit pref]
[    0.351924] pci 0000:05:04.0: PCI bridge to [bus 38-68]
[    0.351928] pci 0000:05:04.0:   bridge window [io  0x4000-0x4fff]
[    0.351931] pci 0000:05:04.0:   bridge window [mem 0xa4800000-0xa87fffff]
[    0.351935] pci 0000:05:04.0:   bridge window [mem 0xb0800000-0xb47fffff 64bit pref]
[    0.351968] pci 0000:05:05.0: PCI bridge to [bus 69]
[    0.352010] pci 0000:05:06.0: PCI bridge to [bus 6a]
[    0.352173] pci 0000:02:00.0: [14e4:16a3] type 00 class 0x020000
[    0.352210] pci 0000:02:00.0: reg 0x10: [mem 0xa0400000-0xa040ffff 64bit pref]
[    0.352234] pci 0000:02:00.0: reg 0x18: [mem 0xa0410000-0xa041ffff 64bit pref]
[    0.352275] pci 0000:02:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[    0.352443] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.352596] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[    0.352637] pci 0000:02:00.1: reg 0x10: [mem 0xa0420000-0xa042ffff 64bit pref]
[    0.352857] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.352919] pci 0000:02:00.1: System wakeup disabled by ACPI
[    0.355866] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.355876] pci 0000:00:1c.0:   bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
[    0.355995] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
[    0.356026] pci 0000:03:00.0: reg 0x10: [mem 0xa0500000-0xa0503fff 64bit]
[    0.356198] pci 0000:03:00.0: supports D1 D2
[    0.356198] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.356256] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.358827] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.358833] pci 0000:00:1c.1:   bridge window [mem 0xa0500000-0xa05fffff]
[    0.359594] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.359645] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.359694] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.359744] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.359799] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.359846] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.359893] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.359941] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.360104] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.360155] ACPI : EC: event unblocked
[    0.360168] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.360169] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.360312] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.360313] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.360316] vgaarb: loaded
[    0.360316] vgaarb: bridge control possible 0000:00:02.0
[    0.360401] SCSI subsystem initialized
[    0.360437] libata version 3.00 loaded.
[    0.360456] ACPI: bus type USB registered
[    0.360471] usbcore: registered new interface driver usbfs
[    0.360479] usbcore: registered new interface driver hub
[    0.360493] usbcore: registered new device driver usb
[    0.360546] Registered efivars operations
[    0.725547] PCI: Using ACPI for IRQ routing
[    0.728755] PCI: pci_cache_line_size set to 64 bytes
[    0.728906] e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
[    0.728908] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.728908] e820: reserve RAM buffer [mem 0x84d2d190-0x87ffffff]
[    0.728909] e820: reserve RAM buffer [mem 0x88d12000-0x8bffffff]
[    0.728911] e820: reserve RAM buffer [mem 0x88d67000-0x8bffffff]
[    0.728912] e820: reserve RAM buffer [mem 0x88e3c000-0x8bffffff]
[    0.728913] e820: reserve RAM buffer [mem 0x88ed7000-0x8bffffff]
[    0.728914] e820: reserve RAM buffer [mem 0x88f92000-0x8bffffff]
[    0.728915] e820: reserve RAM buffer [mem 0x89000000-0x8bffffff]
[    0.728916] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[    0.729005] NetLabel: Initializing
[    0.729006] NetLabel:  domain hash size = 128
[    0.729006] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.729019] NetLabel:  unlabeled traffic allowed by default
[    0.729091] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.729096] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.731123] clocksource: Switched to clocksource hpet
[    0.738861] VFS: Disk quotas dquot_6.6.0
[    0.738882] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.738964] pnp: PnP ACPI init
[    0.739533] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.739537] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.739578] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.739579] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.739581] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.739583] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.739601] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.739666] pnp 00:03: Plug and Play ACPI device, IDs APP000b (active)
[    0.739793] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.739794] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.739798] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.739800] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.739801] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.739802] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.739804] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.739805] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.739806] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    0.739808] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.739810] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.739981] system 00:05: [mem 0x20000000-0x201fffff] has been reserved
[    0.739983] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved
[    0.739985] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.739991] pnp: PnP ACPI: found 6 devices
[    0.746401] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.746406] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[    0.746436] pci 0000:05:05.0: bridge window [io  0x1000-0x0fff] to [bus 69] add_size 1000
[    0.746438] pci 0000:05:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 69] add_size 200000 add_align 100000
[    0.746440] pci 0000:05:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 69] add_size 200000 add_align 100000
[    0.746446] pci 0000:05:06.0: bridge window [io  0x1000-0x0fff] to [bus 6a] add_size 1000
[    0.746447] pci 0000:05:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6a] add_size 200000 add_align 100000
[    0.746448] pci 0000:05:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6a] add_size 200000 add_align 100000
[    0.746489] pci 0000:00:1c.0: BAR 14: assigned [mem 0x8fa00000-0x8fafffff]
[    0.746491] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.746503] pci 0000:05:05.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.746505] pci 0000:05:05.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.746506] pci 0000:05:05.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.746507] pci 0000:05:05.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.746508] pci 0000:05:06.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.746510] pci 0000:05:06.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.746511] pci 0000:05:06.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.746512] pci 0000:05:06.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.746513] pci 0000:05:05.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.746515] pci 0000:05:05.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.746516] pci 0000:05:06.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.746517] pci 0000:05:06.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.746519] pci 0000:05:05.0: BAR 14: no space for [mem size 0x00200000]
[    0.746520] pci 0000:05:05.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.746523] pci 0000:05:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.746524] pci 0000:05:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.746527] pci 0000:05:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.746528] pci 0000:05:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.746530] pci 0000:05:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.746531] pci 0000:05:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.746533] pci 0000:05:05.0: BAR 13: no space for [io  size 0x1000]
[    0.746534] pci 0000:05:05.0: BAR 13: failed to assign [io  size 0x1000]
[    0.746535] pci 0000:05:06.0: BAR 13: no space for [io  size 0x1000]
[    0.746536] pci 0000:05:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.746538] pci 0000:05:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.746539] pci 0000:05:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.746541] pci 0000:05:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.746542] pci 0000:05:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.746543] pci 0000:05:06.0: BAR 13: no space for [io  size 0x1000]
[    0.746544] pci 0000:05:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.746546] pci 0000:05:05.0: BAR 14: no space for [mem size 0x00200000]
[    0.746547] pci 0000:05:05.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.746549] pci 0000:05:05.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.746550] pci 0000:05:05.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.746551] pci 0000:05:05.0: BAR 13: no space for [io  size 0x1000]
[    0.746552] pci 0000:05:05.0: BAR 13: failed to assign [io  size 0x1000]
[    0.746554] pci 0000:05:00.0: PCI bridge to [bus 06]
[    0.746557] pci 0000:05:00.0:   bridge window [mem 0xa0700000-0xa07fffff]
[    0.746563] pci 0000:05:03.0: PCI bridge to [bus 07-37]
[    0.746565] pci 0000:05:03.0:   bridge window [io  0x3000-0x3fff]
[    0.746568] pci 0000:05:03.0:   bridge window [mem 0xa0800000-0xa47fffff]
[    0.746571] pci 0000:05:03.0:   bridge window [mem 0xac800000-0xb07fffff 64bit pref]
[    0.746575] pci 0000:05:04.0: PCI bridge to [bus 38-68]
[    0.746576] pci 0000:05:04.0:   bridge window [io  0x4000-0x4fff]
[    0.746580] pci 0000:05:04.0:   bridge window [mem 0xa4800000-0xa87fffff]
[    0.746582] pci 0000:05:04.0:   bridge window [mem 0xb0800000-0xb47fffff 64bit pref]
[    0.746586] pci 0000:05:05.0: PCI bridge to [bus 69]
[    0.746594] pci 0000:05:06.0: PCI bridge to [bus 6a]
[    0.746602] pci 0000:04:00.0: PCI bridge to [bus 05-6a]
[    0.746604] pci 0000:04:00.0:   bridge window [io  0x3000-0x4fff]
[    0.746607] pci 0000:04:00.0:   bridge window [mem 0xa0700000-0xa87fffff]
[    0.746609] pci 0000:04:00.0:   bridge window [mem 0xac800000-0xb47fffff 64bit pref]
[    0.746613] pci 0000:00:01.1: PCI bridge to [bus 04-9a]
[    0.746614] pci 0000:00:01.1:   bridge window [io  0x3000-0x5fff]
[    0.746616] pci 0000:00:01.1:   bridge window [mem 0xa0700000-0xac7fffff]
[    0.746618] pci 0000:00:01.1:   bridge window [mem 0xac800000-0xb87fffff 64bit pref]
[    0.746622] pci 0000:02:00.0: BAR 6: assigned [mem 0x8fa00000-0x8fa007ff pref]
[    0.746624] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.746633] pci 0000:00:1c.0:   bridge window [mem 0x8fa00000-0x8fafffff]
[    0.746637] pci 0000:00:1c.0:   bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
[    0.746646] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.746652] pci 0000:00:1c.1:   bridge window [mem 0xa0500000-0xa05fffff]
[    0.746665] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.746666] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.746667] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.746668] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.746669] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.746670] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.746671] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.746672] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.746673] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.746674] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.746675] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.746676] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.746677] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.746678] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.746679] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.746680] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.746681] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff window]
[    0.746682] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.746684] pci_bus 0000:04: resource 0 [io  0x3000-0x5fff]
[    0.746685] pci_bus 0000:04: resource 1 [mem 0xa0700000-0xac7fffff]
[    0.746686] pci_bus 0000:04: resource 2 [mem 0xac800000-0xb87fffff 64bit pref]
[    0.746687] pci_bus 0000:05: resource 0 [io  0x3000-0x4fff]
[    0.746688] pci_bus 0000:05: resource 1 [mem 0xa0700000-0xa87fffff]
[    0.746689] pci_bus 0000:05: resource 2 [mem 0xac800000-0xb47fffff 64bit pref]
[    0.746690] pci_bus 0000:06: resource 1 [mem 0xa0700000-0xa07fffff]
[    0.746692] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.746693] pci_bus 0000:07: resource 1 [mem 0xa0800000-0xa47fffff]
[    0.746694] pci_bus 0000:07: resource 2 [mem 0xac800000-0xb07fffff 64bit pref]
[    0.746695] pci_bus 0000:38: resource 0 [io  0x4000-0x4fff]
[    0.746696] pci_bus 0000:38: resource 1 [mem 0xa4800000-0xa87fffff]
[    0.746697] pci_bus 0000:38: resource 2 [mem 0xb0800000-0xb47fffff 64bit pref]
[    0.746698] pci_bus 0000:02: resource 1 [mem 0x8fa00000-0x8fafffff]
[    0.746699] pci_bus 0000:02: resource 2 [mem 0xa0400000-0xa04fffff 64bit pref]
[    0.746700] pci_bus 0000:03: resource 1 [mem 0xa0500000-0xa05fffff]
[    0.746811] NET: Registered protocol family 2
[    0.746982] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.747105] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.747237] TCP: Hash tables configured (established 65536 bind 65536)
[    0.747260] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.747283] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.747342] NET: Registered protocol family 1
[    0.747355] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.747365] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    0.747428] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.747429] pci 0000:00:14.0: PCI INT A: no GSI
[    0.747836] PCI: CLS 256 bytes, default 64
[    0.747883] Unpacking initramfs...
[    1.035286] Freeing initrd memory: 19412K (ffff911afed06000 - ffff911affffb000)
[    1.035341] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.035343] software IO TLB [mem 0x78d0c000-0x7cd0c000] (64MB) mapped at [ffff911b38d0c000-ffff911b3cd0bfff]
[    1.036034] audit: initializing netlink subsys (disabled)
[    1.036049] audit: type=2000 audit(1488956072.022:1): initialized
[    1.036328] Initialise system trusted keyrings
[    1.036421] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[    1.037775] zbud: loaded
[    1.038301] SELinux:  Registering netfilter hooks
[    1.087489] NET: Registered protocol family 38
[    1.087492] Key type asymmetric registered
[    1.087493] Asymmetric key parser 'x509' registered
[    1.087540] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.087573] io scheduler noop registered
[    1.087574] io scheduler deadline registered
[    1.087613] io scheduler cfq registered (default)
[    1.088522] pcieport 0000:05:03.0: enabling device (0000 -> 0003)
[    1.088645] pcieport 0000:05:04.0: enabling device (0000 -> 0003)
[    1.089031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.089041] pciehp 0000:05:03.0:pcie204: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.089075] pciehp 0000:05:03.0:pcie204: service driver pciehp loaded
[    1.089082] pciehp 0000:05:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.089110] pciehp 0000:05:04.0:pcie204: service driver pciehp loaded
[    1.089117] pciehp 0000:05:05.0:pcie204: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.089150] pciehp 0000:05:05.0:pcie204: service driver pciehp loaded
[    1.089156] pciehp 0000:05:06.0:pcie204: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[    1.089183] pciehp 0000:05:06.0:pcie204: service driver pciehp loaded
[    1.089187] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.089209] efifb: probing for efifb
[    1.089225] efifb: framebuffer at 0x90000000, using 16000k, total 16000k
[    1.089225] efifb: mode is 2560x1600x32, linelength=10240, pages=1
[    1.089226] efifb: scrolling: redraw
[    1.089227] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.089337] Console: switching to colour frame buffer device 320x100
[    1.098144] fb0: EFI VGA frame buffer device
[    1.098153] intel_idle: MWAIT substates: 0x21120
[    1.098154] intel_idle: v0.4.1 model 0x3A
[    1.098289] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.098356] ACPI: AC Adapter [ADP1] (on-line)
[    1.098428] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.098444] ACPI: Lid Switch [LID0]
[    1.098474] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.098476] ACPI: Power Button [PWRB]
[    1.098507] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.098508] ACPI: Sleep Button [SLPB]
[    1.098537] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.098538] ACPI: Power Button [PWRF]
[    1.100003] GHES: HEST is not enabled!
[    1.100078] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.101632] Non-volatile memory driver v1.3
[    1.101659] Linux agpgart interface v0.103
[    1.102019] ahci 0000:00:1f.2: version 3.0
[    1.102176] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    1.102179] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.102682] scsi host0: ahci
[    1.102804] scsi host1: ahci
[    1.102897] scsi host2: ahci
[    1.103004] scsi host3: ahci
[    1.103102] scsi host4: ahci
[    1.103220] scsi host5: ahci
[    1.103262] ata1: SATA max UDMA/133 abar m2048@0xa0616000 port 0xa0616100 irq 32
[    1.103263] ata2: DUMMY
[    1.103263] ata3: DUMMY
[    1.103264] ata4: DUMMY
[    1.103264] ata5: DUMMY
[    1.103265] ata6: DUMMY
[    1.103364] libphy: Fixed MDIO Bus: probed
[    1.103421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.103424] ehci-pci: EHCI PCI platform driver
[    1.103536] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.103575] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.103589] ehci-pci 0000:00:1a.0: debug port 2
[    1.107478] ehci-pci 0000:00:1a.0: cache line size of 256 is not supported
[    1.107487] ehci-pci 0000:00:1a.0: irq 23, io mem 0xa0616c00
[    1.114144] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.114178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.114179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114180] usb usb1: Product: EHCI Host Controller
[    1.114181] usb usb1: Manufacturer: Linux 4.9.13-100.fc24.x86_64 ehci_hcd
[    1.114182] usb usb1: SerialNumber: 0000:00:1a.0
[    1.114318] hub 1-0:1.0: USB hub found
[    1.114324] hub 1-0:1.0: 2 ports detected
[    1.114508] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.114576] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.114588] ehci-pci 0000:00:1d.0: debug port 2
[    1.118496] ehci-pci 0000:00:1d.0: cache line size of 256 is not supported
[    1.118504] ehci-pci 0000:00:1d.0: irq 22, io mem 0xa0616800
[    1.125141] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.125168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.125169] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.125170] usb usb2: Product: EHCI Host Controller
[    1.125171] usb usb2: Manufacturer: Linux 4.9.13-100.fc24.x86_64 ehci_hcd
[    1.125172] usb usb2: SerialNumber: 0000:00:1d.0
[    1.125312] hub 2-0:1.0: USB hub found
[    1.125316] hub 2-0:1.0: 2 ports detected
[    1.125411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.125418] ohci-pci: OHCI PCI platform driver
[    1.125426] uhci_hcd: USB Universal Host Controller Interface driver
[    1.125509] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.125510] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.125530] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.125623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.126727] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.126733] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[    1.126820] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.126822] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.126823] usb usb3: Product: xHCI Host Controller
[    1.126824] usb usb3: Manufacturer: Linux 4.9.13-100.fc24.x86_64 xhci-hcd
[    1.126825] usb usb3: SerialNumber: 0000:00:14.0
[    1.126996] hub 3-0:1.0: USB hub found
[    1.127009] hub 3-0:1.0: 4 ports detected
[    1.127198] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.127292] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.127338] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.127339] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.127340] usb usb4: Product: xHCI Host Controller
[    1.127341] usb usb4: Manufacturer: Linux 4.9.13-100.fc24.x86_64 xhci-hcd
[    1.127342] usb usb4: SerialNumber: 0000:00:14.0
[    1.127478] hub 4-0:1.0: USB hub found
[    1.127488] hub 4-0:1.0: 4 ports detected
[    1.127646] usbcore: registered new interface driver usbserial
[    1.127651] usbcore: registered new interface driver usbserial_generic
[    1.127656] usbserial: USB Serial support registered for generic
[    1.127732] mousedev: PS/2 mouse device common for all mice
[    1.128037] rtc_cmos 00:02: RTC can wake from S4
[    1.128210] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.128239] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.128291] device-mapper: uevent: version 1.0.3
[    1.128420] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.128521] intel_pstate: Intel P-state driver initializing
[    1.129165] hidraw: raw HID events driver (C) Jiri Kosina
[    1.129243] usbcore: registered new interface driver usbhid
[    1.129244] usbhid: USB HID core driver
[    1.129372] drop_monitor: Initializing network drop monitor service
[    1.129485] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.129569] Initializing XFRM netlink socket
[    1.129763] NET: Registered protocol family 10
[    1.130233] mip6: Mobile IPv6
[    1.130236] NET: Registered protocol family 17
[    1.130656] microcode: sig=0x306a9, pf=0x10, revision=0x1c
[    1.130794] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.130806] AVX version of gcm_enc/dec engaged.
[    1.130807] AES CTR mode by8 optimization enabled
[    1.139427] registered taskstats version 1
[    1.139443] Loading compiled-in X.509 certificates
[    1.142530] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[    1.144181] Loaded X.509 cert 'Fedora kernel signing key: 31a7cc6542c98f59f6092de766a8e267f411fe1b'
[    1.144230] zswap: loaded using pool lzo/zbud
[    1.163044] Key type big_key registered
[    1.165793] Key type encrypted registered
[    1.166681]   Magic number: 9:107:923
[    1.166845] rtc_cmos 00:02: setting system clock to 2017-03-08 06:54:32 UTC (1488956072)
[    1.166955] PM: Hibernation image not present or could not be loaded.
[    1.411068] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.411745] ata1.00: unexpected _GTF length (8)
[    1.411962] ata1.00: ATA-8: APPLE SSD SM128E, CXM09A1Q, max UDMA/133
[    1.411965] ata1.00: 236978176 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.412452] ata1.00: unexpected _GTF length (8)
[    1.412683] ata1.00: configured for UDMA/133
[    1.413227] scsi 0:0:0:0: Direct-Access     ATA      APPLE SSD SM128E 9A1Q PQ: 0 ANSI: 5
[    1.421761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.421812] sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
[    1.421817] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.422380] sd 0:0:0:0: [sda] Write Protect is off
[    1.422386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.422492] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.426613]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    1.427804] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.428184] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.430323] Freeing unused kernel memory: 1688K (ffffffff82f65000 - ffffffff8310b000)
[    1.430325] Write protecting the kernel read-only data: 14336k
[    1.431169] Freeing unused kernel memory: 1892K (ffff911ae9827000 - ffff911ae9a00000)
[    1.433702] Freeing unused kernel memory: 700K (ffff911ae9d51000 - ffff911ae9e00000)
[    1.436169] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.447266] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.542063] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
[    1.555579] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.555583] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.555655] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.555657] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.555884] hub 2-1:1.0: USB hub found
[    1.555929] hub 1-1:1.0: USB hub found
[    1.556069] hub 2-1:1.0: 8 ports detected
[    1.556075] hub 1-1:1.0: 6 ports detected
[    1.558540] usb 4-3: New USB device found, idVendor=05e3, idProduct=0616
[    1.558543] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.558554] usb 4-3: Product: USB3.0 Hub
[    1.558555] usb 4-3: Manufacturer: GenesysLogic
[    1.560675] hub 4-3:1.0: USB hub found
[    1.561093] hub 4-3:1.0: 4 ports detected
[    1.710151] usb 3-3: new high-speed USB device number 3 using xhci_hcd
[    1.828152] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    1.828163] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
[    1.889582] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610
[    1.889584] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.889586] usb 3-3: Product: USB2.0 Hub
[    1.889587] usb 3-3: Manufacturer: GenesysLogic
[    1.890893] hub 3-3:1.0: USB hub found
[    1.892241] hub 3-3:1.0: 4 ports detected
[    1.906574] usb 2-1.8: New USB device found, idVendor=0424, idProduct=2512
[    1.906575] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.906853] hub 2-1.8:1.0: USB hub found
[    1.906917] hub 2-1.8:1.0: 2 ports detected
[    1.936078] usb 1-1.1: New USB device found, idVendor=05ac, idProduct=8510
[    1.936081] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.936093] usb 1-1.1: Product: FaceTime HD Camera (Built-in)
[    1.936094] usb 1-1.1: Manufacturer: Apple Inc.
[    1.936095] usb 1-1.1: SerialNumber: CC2F13017YDN9KE0
[    1.986253] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[    1.999997] random: fast init done
[    2.000576] usb 4-1: New USB device found, idVendor=0480, idProduct=a00c
[    2.000589] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.000590] usb 4-1: Product: External USB 3.0
[    2.000591] usb 4-1: Manufacturer: TOSHIBA
[    2.000592] usb 4-1: SerialNumber: 20160116011789
[    2.092153] tsc: Refined TSC clocksource calibration: 2494.339 MHz
[    2.092159] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45633907, max_idle_ns: 440795317553 ns
[    2.132098] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    2.132225] systemd[1]: Detected architecture x86-64.
[    2.132227] systemd[1]: Running in initial RAM disk.
[    2.132238] systemd[1]: Set hostname to <guru-laptop.bazaari.com.au>.
[    2.170185] systemd[1]: Listening on udev Control Socket.
[    2.170232] systemd[1]: Reached target Timers.
[    2.170526] systemd[1]: Created slice System Slice.
[    2.170543] systemd[1]: Reached target Slices.
[    2.170586] systemd[1]: Listening on Journal Socket.
[    2.170976] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    2.178595] audit: type=1130 audit(1488956073.510:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.181287] audit: type=1130 audit(1488956073.513:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.192148] usb 2-1.8.1: new full-speed USB device number 4 using ehci-pci
[    2.216704] audit: type=1130 audit(1488956073.548:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.238951] audit: type=1130 audit(1488956073.570:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.261690] audit: type=1130 audit(1488956073.593:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.282112] audit: type=1130 audit(1488956073.613:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.284156] usb 2-1.8.1: New USB device found, idVendor=0a5c, idProduct=4500
[    2.284159] usb 2-1.8.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.284161] usb 2-1.8.1: Product: BRCM20702 Hub
[    2.284162] usb 2-1.8.1: Manufacturer: Apple Inc.
[    2.284436] hub 2-1.8.1:1.0: USB hub found
[    2.284657] hub 2-1.8.1:1.0: 3 ports detected
[    2.286563] audit: type=1130 audit(1488956073.618:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.337090] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    2.337305] audit: type=1130 audit(1488956073.669:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.363151] usb 2-1.8.2: new full-speed USB device number 5 using ehci-pci
[    2.368673] usb-storage 4-1:1.0: USB Mass Storage device detected
[    2.374158] scsi host6: usb-storage 4-1:1.0
[    2.374258] usbcore: registered new interface driver usb-storage
[    2.376736] sdhci: Secure Digital Host Controller Interface driver
[    2.376737] sdhci: Copyright(c) Pierre Ossman
[    2.377858] usbcore: registered new interface driver uas
[    2.379517] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 21)
[    2.382187] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit
[    2.383368] [drm] Initialized
[    2.459408] usb 2-1.8.2: New USB device found, idVendor=05ac, idProduct=0259
[    2.459411] usb 2-1.8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.459413] usb 2-1.8.2: Product: Apple Internal Keyboard / Trackpad
[    2.459415] usb 2-1.8.2: Manufacturer: Apple Inc.
[    2.469952] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:05AC:0259.0001/input/input4
[    2.480345] [drm] Memory usable by graphics device = 2048M
[    2.480348] checking generic (90000000 fa0000) vs hw (90000000 10000000)
[    2.480349] fb: switching to inteldrmfb from EFI VGA
[    2.480377] Console: switching to colour dummy device 80x25
[    2.480464] [drm] Replacing VGA console driver
[    2.521564] apple 0003:05AC:0259.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input0
[    2.533578] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.533580] [drm] Driver supports precise vblank timestamp query.
[    2.533939] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.556168] usb 2-1.8.1.1: new full-speed USB device number 6 using ehci-pci
[    2.598661] apple 0003:05AC:0259.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-1.8.2/input1
[    2.636686] usb 2-1.8.1.1: New USB device found, idVendor=05ac, idProduct=820a
[    2.636689] usb 2-1.8.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.637930] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.1/2-1.8.1.1:1.0/0003:05AC:820A.0003/input/input5
[    2.689347] hid-generic 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1d.0-1.8.1.1/input0
[    2.753183] usb 2-1.8.1.2: new full-speed USB device number 7 using ehci-pci
[    2.833673] usb 2-1.8.1.2: New USB device found, idVendor=05ac, idProduct=820b
[    2.833678] usb 2-1.8.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.835222] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.1/2-1.8.1.2/2-1.8.1.2:1.0/0003:05AC:820B.0004/input/input6
[    2.835383] hid-generic 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1d.0-1.8.1.2/input0
[    2.899179] usb 2-1.8.1.3: new full-speed USB device number 8 using ehci-pci
[    2.980032] usb 2-1.8.1.3: New USB device found, idVendor=05ac, idProduct=828c
[    2.980035] usb 2-1.8.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.980036] usb 2-1.8.1.3: Product: Bluetooth USB Host Controller
[    2.980038] usb 2-1.8.1.3: Manufacturer: Apple Inc.
[    3.028321] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    3.028799] acpi device:42: registered as cooling_device4
[    3.028899] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    3.029052] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    3.116457] clocksource: Switched to clocksource tsc
[    3.350066] fbcon: inteldrmfb (fb0) is primary device
[    3.441947] scsi 6:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[    3.444742] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    3.445014] sd 6:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.445396] sd 6:0:0:0: [sdb] Write Protect is off
[    3.445402] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    3.446548] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.793392] Console: switching to colour frame buffer device 320x100
[    4.826238] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.357075] audit: type=1130 audit(1488956076.688:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.307570]  sdb: sdb1
[    6.310607] sd 6:0:0:0: [sdb] Attached SCSI disk
[    7.148320] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   12.780432] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   12.988322] usb 4-3.1: device not accepting address 4, error -62
[   13.053325] usb 3-3.1: new full-speed USB device number 4 using xhci_hcd
[   13.120435] usb 3-3.1: device descriptor read/64, error -32
[   13.295437] usb 3-3.1: device descriptor read/64, error -32
[   18.924482] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   24.556532] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   24.764421] usb 4-3.1: device not accepting address 5, error -62
[   24.830426] usb 3-3.1: new full-speed USB device number 5 using xhci_hcd
[   24.897525] usb 3-3.1: device descriptor read/64, error -32
[   25.070525] usb 3-3.1: device descriptor read/64, error -32
[   30.700572] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   36.332594] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   36.540509] usb 4-3.1: device not accepting address 6, error -62
[   36.607511] usb 3-3.1: new full-speed USB device number 6 using xhci_hcd
[   36.607705] usb 3-3.1: Device not responding to setup address.
[   36.812704] usb 3-3.1: Device not responding to setup address.
[   37.020523] usb 3-3.1: device not accepting address 6, error -71
[   42.476671] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   48.108653] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   48.316609] usb 4-3.1: device not accepting address 7, error -62
[   48.316999] usb 4-3-port1: unable to enumerate USB device
[   48.384622] usb 3-3.1: new full-speed USB device number 7 using xhci_hcd
[   48.384792] usb 3-3.1: Device not responding to setup address.
[   48.588791] usb 3-3.1: Device not responding to setup address.
[   48.796623] usb 3-3.1: device not accepting address 7, error -71
[   48.797269] usb 3-3-port1: unable to enumerate USB device
[   48.866628] usb 3-3.3: new high-speed USB device number 8 using xhci_hcd
[   48.954616] usb 3-3.3: New USB device found, idVendor=05ac, idProduct=1006
[   48.954620] usb 3-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   48.954623] usb 3-3.3: Product: Keyboard Hub
[   48.954625] usb 3-3.3: Manufacturer: Apple, Inc.
[   48.954627] usb 3-3.3: SerialNumber: 000000000000
[   48.955258] hub 3-3.3:1.0: USB hub found
[   48.955327] hub 3-3.3:1.0: 3 ports detected
[   49.024615] usb 3-3.4: new full-speed USB device number 9 using xhci_hcd
[   49.106422] usb 3-3.4: not running at top speed; connect to a high speed hub
[   49.120465] usb 3-3.4: New USB device found, idVendor=0b95, idProduct=7720
[   49.120469] usb 3-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   49.120472] usb 3-3.4: Product: USB 2.0 10/100 LAN
[   49.120474] usb 3-3.4: Manufacturer: USB 
[   49.120476] usb 3-3.4: SerialNumber: 000FFF
[   49.228578] usb 3-3.3.2: new low-speed USB device number 10 using xhci_hcd
[   49.312882] usb 3-3.3.2: New USB device found, idVendor=05ac, idProduct=0220
[   49.312887] usb 3-3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   49.312890] usb 3-3.3.2: Product: Apple Keyboard
[   49.312892] usb 3-3.3.2: Manufacturer: Apple, Inc
[   49.318201] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.2/3-3.3.2:1.0/0003:05AC:0220.0005/input/input8
[   49.370384] apple 0003:05AC:0220.0005: input,hidraw4: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-3.3.2/input0
[   49.373765] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.2/3-3.3.2:1.1/0003:05AC:0220.0006/input/input9
[   49.377766] asix 3-3.4:1.0 eth0: register 'asix' at usb-0000:00:14.0-3.4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:d0:fc:66
[   49.377854] usbcore: registered new interface driver asix
[   49.380153] asix 3-3.4:1.0 enp0s20u3u4: renamed from eth0
[   49.426020] apple 0003:05AC:0220.0006: input,hidraw5: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:14.0-3.3.2/input1
[   49.489727] usb 3-3.3.3: new low-speed USB device number 11 using xhci_hcd
[   49.633545] audit: type=1130 audit(1488956120.964:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.652802] audit: type=1130 audit(1488956120.984:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.665439] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   49.684143] usb 3-3.3.3: New USB device found, idVendor=0e8f, idProduct=00a7
[   49.684146] usb 3-3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   49.684147] usb 3-3.3.3: Product: 2.4G RX
[   49.684148] usb 3-3.3.3: Manufacturer: DaKai
[   49.687585] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.0/0003:0E8F:00A7.0007/input/input10
[   49.718338] audit: type=1130 audit(1488956121.049:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.718358] audit: type=1131 audit(1488956121.049:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.740020] hid-generic 0003:0E8F:00A7.0007: input,hidraw6: USB HID v1.10 Keyboard [DaKai 2.4G RX] on usb-0000:00:14.0-3.3.3/input0
[   49.748138] input: DaKai 2.4G RX as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3.3/3-3.3.3:1.1/0003:0E8F:00A7.0008/input/input11
[   49.800214] hid-generic 0003:0E8F:00A7.0008: input,hiddev0,hidraw7: USB HID v1.10 Mouse [DaKai 2.4G RX] on usb-0000:00:14.0-3.3.3/input1
[   49.951920] audit: type=1130 audit(1488956121.283:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.962560] audit: type=1130 audit(1488956121.293:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.962602] audit: type=1131 audit(1488956121.294:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.964072] audit: type=1131 audit(1488956121.295:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.964873] audit: type=1130 audit(1488956121.296:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   49.964907] audit: type=1131 audit(1488956121.296:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.009870] systemd-journald[202]: Received SIGTERM from PID 1 (systemd).
[   50.032744] systemd: 15 output lines suppressed due to ratelimiting
[   50.081811] SELinux:  Disabled at runtime.
[   50.081834] SELinux:  Unregistering netfilter hooks
[   50.161977] random: crng init done
[   50.258893] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   50.309706] RPC: Registered named UNIX socket transport module.
[   50.309707] RPC: Registered udp transport module.
[   50.309708] RPC: Registered tcp transport module.
[   50.309708] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   50.349840] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   50.387051] systemd-journald[609]: Received request to flush runtime journal from PID 1
[   50.479388] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   50.483337] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247)
[   50.483345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   50.483350] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   50.483354] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   50.483355] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   50.483359] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   50.483359] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247)
[   50.483363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   50.483364] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   50.554679] apple_gmux: gmux device not present or IO disabled
[   50.554903] ACPI: SBS HC: EC = 0xffff911d25495a00, offset = 0x20, query_bit = 0x10
[   50.557731] thunderbolt 0000:06:00.0: NHI initialized, starting thunderbolt
[   50.557743] thunderbolt 0000:06:00.0: allocating TX ring 0 of size 10
[   50.557747] thunderbolt 0000:06:00.0: allocating RX ring 0 of size 10
[   50.557750] thunderbolt 0000:06:00.0: control channel created
[   50.557752] thunderbolt 0000:06:00.0: control channel starting...
[   50.557753] thunderbolt 0000:06:00.0: starting TX ring 0
[   50.557758] thunderbolt 0000:06:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   50.557759] thunderbolt 0000:06:00.0: starting RX ring 0
[   50.557763] thunderbolt 0000:06:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   50.560326] thunderbolt 0000:06:00.0: initializing Switch at 0x0 (depth: 0, up port: 5)
[   50.560328] thunderbolt 0000:06:00.0: old switch config:
[   50.560330] thunderbolt 0000:06:00.0:  Switch: 8086:1547 (Revision: 3, TB Version: 1)
[   50.560331] thunderbolt 0000:06:00.0:   Max Port Number: 12
[   50.560332] thunderbolt 0000:06:00.0:   Config:
[   50.560334] thunderbolt 0000:06:00.0:    Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 255ms
[   50.560336] thunderbolt 0000:06:00.0:    unknown1: 0x0 unknown4: 0x0
[   50.599187] thunderbolt 0000:06:00.0: 0: uid: 0x1000000000000
[   50.599282] thunderbolt 0000:06:00.0:  Port 0: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
[   50.599284] thunderbolt 0000:06:00.0:   Max hop id (in/out): 7/7
[   50.599285] thunderbolt 0000:06:00.0:   Max counters: 8
[   50.599286] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.599782] thunderbolt 0000:06:00.0:  Port 1: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
[   50.599784] thunderbolt 0000:06:00.0:   Max hop id (in/out): 15/15
[   50.599785] thunderbolt 0000:06:00.0:   Max counters: 16
[   50.599786] thunderbolt 0000:06:00.0:   NFC Credits: 0x3c00000
[   50.600279] thunderbolt 0000:06:00.0:  Port 2: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
[   50.600281] thunderbolt 0000:06:00.0:   Max hop id (in/out): 15/15
[   50.600282] thunderbolt 0000:06:00.0:   Max counters: 16
[   50.600284] thunderbolt 0000:06:00.0:   NFC Credits: 0x3c00000
[   50.601553] thunderbolt 0000:06:00.0:  Port 3: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
[   50.601554] thunderbolt 0000:06:00.0:   Max hop id (in/out): 15/15
[   50.601555] thunderbolt 0000:06:00.0:   Max counters: 16
[   50.601556] thunderbolt 0000:06:00.0:   NFC Credits: 0x3c00000
[   50.605416] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   50.607229] thunderbolt 0000:06:00.0:  Port 4: 8086:1547 (Revision: 3, TB Version: 1, Type: Port (0x1))
[   50.607232] thunderbolt 0000:06:00.0:   Max hop id (in/out): 15/15
[   50.607233] thunderbolt 0000:06:00.0:   Max counters: 16
[   50.607234] thunderbolt 0000:06:00.0:   NFC Credits: 0x3c00000
[   50.607330] thunderbolt 0000:06:00.0:  Port 5: 8086:1547 (Revision: 3, TB Version: 1, Type: NHI (0x2))
[   50.607332] thunderbolt 0000:06:00.0:   Max hop id (in/out): 11/11
[   50.607333] thunderbolt 0000:06:00.0:   Max counters: 16
[   50.607334] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.607433] thunderbolt 0000:06:00.0:  Port 6: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
[   50.607435] thunderbolt 0000:06:00.0:   Max hop id (in/out): 8/8
[   50.607436] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.607437] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.607526] thunderbolt 0000:06:00.0:  Port 7: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
[   50.607528] thunderbolt 0000:06:00.0:   Max hop id (in/out): 8/8
[   50.607529] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.607530] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.609402] thunderbolt 0000:06:00.0:  Port 8: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
[   50.609404] thunderbolt 0000:06:00.0:   Max hop id (in/out): 8/8
[   50.609405] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.609406] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.611265] thunderbolt 0000:06:00.0:  Port 9: 8086:1547 (Revision: 3, TB Version: 1, Type: PCIe (0x100101))
[   50.611268] thunderbolt 0000:06:00.0:   Max hop id (in/out): 8/8
[   50.611269] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.611270] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.611310] thunderbolt 0000:06:00.0:  Port 10: ffff:ffff (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0102))
[   50.611311] thunderbolt 0000:06:00.0:   Max hop id (in/out): 9/9
[   50.611312] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.611313] thunderbolt 0000:06:00.0:   NFC Credits: 0x700000
[   50.611393] thunderbolt 0000:06:00.0:  Port 11: 8086:1547 (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0101))
[   50.611394] thunderbolt 0000:06:00.0:   Max hop id (in/out): 9/9
[   50.611395] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.611396] thunderbolt 0000:06:00.0:   NFC Credits: 0xf00000
[   50.611490] thunderbolt 0000:06:00.0:  Port 12: 8086:1547 (Revision: 3, TB Version: 1, Type: DP/HDMI (0xe0101))
[   50.611492] thunderbolt 0000:06:00.0:   Max hop id (in/out): 9/9
[   50.611492] thunderbolt 0000:06:00.0:   Max counters: 2
[   50.611493] thunderbolt 0000:06:00.0:   NFC Credits: 0xf00000
[   50.611988] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[   50.615147] thunderbolt 0000:06:00.0: 0:1: is unplugged (state: 7)
[   50.615204] thunderbolt 0000:06:00.0: 0:3: is unplugged (state: 7)
[   50.662329] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   50.662331] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   50.662332] RAPL PMU: hw unit of domain package 2^-16 Joules
[   50.662332] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   50.721430] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   50.764751] wl: loading out-of-tree module taints kernel.
[   50.764754] wl: module license 'MIXED/Proprietary' taints kernel.
[   50.764755] Disabling lock debugging due to kernel taint
[   50.772687] wl: module verification failed: signature and/or required key missing - tainting kernel
[   50.794220] media: Linux media interface: v0.10
[   50.825826] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4206: line_outs=2 (0xb/0xa/0x0/0x0/0x0) type:speaker
[   50.825829] snd_hda_codec_cirrus hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   50.825830] snd_hda_codec_cirrus hdaudioC0D0:    hp_outs=1 (0x9/0x0/0x0/0x0/0x0)
[   50.825832] snd_hda_codec_cirrus hdaudioC0D0:    mono: mono_out=0x0
[   50.825833] snd_hda_codec_cirrus hdaudioC0D0:    dig-out=0x10/0x0
[   50.825834] snd_hda_codec_cirrus hdaudioC0D0:    inputs:
[   50.825836] snd_hda_codec_cirrus hdaudioC0D0:      Internal Mic=0x12
[   50.825837] snd_hda_codec_cirrus hdaudioC0D0:      Internal Mic=0xe
[   50.917091] eth0: Broadcom BCM4331 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[   50.924882] input: bcm5974 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.2/input/input13
[   50.924973] usbcore: registered new interface driver bcm5974
[   50.926746] Linux video capture interface: v2.00
[   50.930016] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   50.938558] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   50.938633] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   50.938704] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   50.938768] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   50.981696] uvcvideo: Found UVC 1.00 device FaceTime HD Camera (Built-in) (05ac:8510)
[   50.992721] uvcvideo 1-1.1:1.0: Entity type for entity Processing 3 was not initialized!
[   50.992725] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   50.992826] input: FaceTime HD Camera (Built-in) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input17
[   50.992915] usbcore: registered new interface driver uvcvideo
[   50.992916] USB Video Class driver (1.1.1)
[   50.998452] intel_rapl: Found RAPL domain package
[   50.998454] intel_rapl: Found RAPL domain core
[   50.998455] intel_rapl: Found RAPL domain uncore
[   51.040988] iTCO_vendor_support: vendor-support=0
[   51.044149] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   51.044192] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   51.044764] Bluetooth: Core ver 2.22
[   51.044781] NET: Registered protocol family 31
[   51.044782] Bluetooth: HCI device and connection manager initialized
[   51.044785] Bluetooth: HCI socket layer initialized
[   51.044788] Bluetooth: L2CAP socket layer initialized
[   51.044796] Bluetooth: SCO socket layer initialized
[   51.073212] applesmc: key=455 fan=2 temp=29 index=29 acc=1 lux=2 kbd=1
[   51.076666] usbcore: registered new interface driver btusb
[   51.079688] input: applesmc as /devices/platform/applesmc.768/input/input18
[   51.082773] Bluetooth: hci0: BCM: chip id 63 build 1806
[   51.083766] Bluetooth: hci0: BCM: product 05ac:828c
[   51.087239] Adding 8130556k swap on /dev/mapper/fedora_guru--laptop-swap.  Priority:-1 extents:1 across:8130556k SSFS
[   51.091532] wl 0000:03:00.0 wlp3s0: renamed from eth0
[   51.099767] Bluetooth: hci0: guru-laptop.bazaari.com.au
[   51.172086] usb 2-1.8.1.1: USB disconnect, device number 6
[   51.360998] usb 2-1.8.1.2: USB disconnect, device number 7
[   51.372738] vboxdrv: Found 4 processor cores
[   51.394726] vboxdrv: TSC mode is Invariant, tentative frequency 2494404069 Hz
[   51.394727] vboxdrv: Successfully loaded version 5.1.14 (interface 0x00280000)
[   51.495742] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   51.604343] VBoxNetFlt: Successfully started.
[   51.610431] VBoxNetAdp: Successfully started.
[   51.616350] VBoxPciLinuxInit
[   51.616356] vboxpci: IOMMU not found (not registered)
[   51.995085] IPv6: ADDRCONF(NETDEV_UP): enp0s20u3u4: link is not ready
[   51.995386] IPv6: ADDRCONF(NETDEV_UP): enp0s20u3u4: link is not ready
[   52.026926] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   52.026928] Bluetooth: BNEP filters: protocol multicast
[   52.026931] Bluetooth: BNEP socket layer initialized
[   52.181317] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u3u4: link becomes ready
[   52.184523] asix 3-3.4:1.0 enp0s20u3u4: link up, 100Mbps, full-duplex, lpa 0x41E1
[   52.283163] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   52.301718] Ebtables v2.0 registered
[   52.347296] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   52.353703] tun: Universal TUN/TAP device driver, 1.6
[   52.353704] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   52.405680] virbr0: port 1(virbr0-nic) entered blocking state
[   52.405683] virbr0: port 1(virbr0-nic) entered disabled state
[   52.405803] device virbr0-nic entered promiscuous mode
[   52.505551] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   52.544419] virbr0: port 1(virbr0-nic) entered blocking state
[   52.544422] virbr0: port 1(virbr0-nic) entered listening state
[   52.579542] virbr0: port 1(virbr0-nic) entered disabled state
[   52.582324] device virbr0-nic left promiscuous mode
[   52.582364] virbr0: port 1(virbr0-nic) entered disabled state
[   64.682001] fuse init (API version 7.26)
[   65.665746] Bluetooth: RFCOMM TTY layer initialized
[   65.665751] Bluetooth: RFCOMM socket layer initialized
[   65.665758] Bluetooth: RFCOMM ver 1.11
[   67.056034] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   73.200874] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   73.427148] usb 4-3.1: device not accepting address 8, error -62
[   79.249938] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   84.882048] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   85.090024] usb 4-3.1: device not accepting address 9, error -62
[   90.514244] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   96.146409] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   96.354407] usb 4-3.1: device not accepting address 10, error -62
[  101.778586] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  107.410796] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  107.618774] usb 4-3.1: device not accepting address 11, error -62
[  107.619038] usb 4-3-port1: unable to enumerate USB device
[  152.468366] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  158.100577] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  158.308572] usb 4-3.1: device not accepting address 12, error -62
[  163.732783] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  169.365016] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  169.572987] usb 4-3.1: device not accepting address 13, error -62
[  174.997209] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  180.629406] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  180.837402] usb 4-3.1: device not accepting address 14, error -62
[  186.261619] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  191.894833] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  192.101845] usb 4-3.1: device not accepting address 15, error -62
[  192.102117] usb 4-3-port1: unable to enumerate USB device
[  233.367436] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  238.999659] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  239.207651] usb 4-3.1: device not accepting address 16, error -62
[  244.631876] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  250.264112] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  250.472093] usb 4-3.1: device not accepting address 17, error -62
[  255.896471] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  261.528570] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  261.736536] usb 4-3.1: device not accepting address 18, error -62
[  267.160782] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  272.792993] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  273.000971] usb 4-3.1: device not accepting address 19, error -62
[  273.001302] usb 4-3-port1: unable to enumerate USB device
[  312.218456] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  317.850679] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  318.058663] usb 4-3.1: device not accepting address 20, error -62
[  323.482869] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  329.115089] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  329.324076] usb 4-3.1: device not accepting address 21, error -62
[  334.747325] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  340.379573] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  340.587564] usb 4-3.1: device not accepting address 22, error -62
[  346.011826] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  351.644080] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  351.852067] usb 4-3.1: device not accepting address 23, error -62
[  351.852337] usb 4-3-port1: unable to enumerate USB device
[  431.519464] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  437.151703] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  437.359689] usb 4-3.1: device not accepting address 24, error -62
[  442.783912] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  448.416140] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  448.624132] usb 4-3.1: device not accepting address 25, error -62
[  454.049351] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  459.680591] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  459.888574] usb 4-3.1: device not accepting address 26, error -62
[  465.312821] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  470.945052] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  471.153042] usb 4-3.1: device not accepting address 27, error -62
[  471.153312] usb 4-3-port1: unable to enumerate USB device
[  546.724120] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  552.356313] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  552.564311] usb 4-3.1: device not accepting address 28, error -62
[  557.988524] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  563.620724] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  563.828704] usb 4-3.1: device not accepting address 29, error -62
[  569.252921] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  574.885352] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  575.093112] usb 4-3.1: device not accepting address 30, error -62
[  580.517316] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  586.149535] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  586.357520] usb 4-3.1: device not accepting address 31, error -62
[  586.357797] usb 4-3-port1: unable to enumerate USB device
[  727.466632] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  733.098983] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  733.306914] usb 4-3.1: device not accepting address 32, error -62
[  738.731177] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  744.363264] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  744.571258] usb 4-3.1: device not accepting address 33, error -62
[  749.995542] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  755.627727] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  755.835703] usb 4-3.1: device not accepting address 34, error -62
[  761.259944] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  766.892150] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  767.100129] usb 4-3.1: device not accepting address 35, error -62
[  767.100471] usb 4-3-port1: unable to enumerate USB device
[  817.069981] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  822.702162] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  822.910155] usb 4-3.1: device not accepting address 36, error -62
[  828.334358] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  833.966582] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  834.174561] usb 4-3.1: device not accepting address 37, error -62
[  839.598795] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  845.231033] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  845.438966] usb 4-3.1: device not accepting address 38, error -62
[  850.863203] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  856.495395] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  856.703392] usb 4-3.1: device not accepting address 39, error -62
[  856.703730] usb 4-3-port1: unable to enumerate USB device
[  899.505035] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  905.137264] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  905.345202] usb 4-3.1: device not accepting address 40, error -62
[  910.770054] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  916.401588] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  916.609612] usb 4-3.1: device not accepting address 41, error -62
[  922.033829] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  927.666040] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  927.874018] usb 4-3.1: device not accepting address 42, error -62
[  933.298220] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  938.930415] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  939.138403] usb 4-3.1: device not accepting address 43, error -62
[  939.138707] usb 4-3-port1: unable to enumerate USB device
[  958.387122] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  964.019397] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  964.227372] usb 4-3.1: device not accepting address 44, error -62
[  969.651601] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  975.283749] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  975.491749] usb 4-3.1: device not accepting address 45, error -62
[  980.915963] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  986.548221] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  986.756197] usb 4-3.1: device not accepting address 46, error -62
[  992.180351] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  997.812637] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[  998.020516] usb 4-3.1: device not accepting address 47, error -62
[  998.020832] usb 4-3-port1: unable to enumerate USB device
[ 1011.125113] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1016.757279] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1016.965253] usb 4-3.1: device not accepting address 48, error -62
[ 1022.389554] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1028.021666] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1028.229653] usb 4-3.1: device not accepting address 49, error -62
[ 1033.653945] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1039.286075] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1039.494075] usb 4-3.1: device not accepting address 50, error -62
[ 1044.918322] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1050.550553] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1050.758521] usb 4-3.1: device not accepting address 51, error -62
[ 1050.758871] usb 4-3-port1: unable to enumerate USB device
[ 1113.528873] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1119.161001] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1119.369039] usb 4-3.1: device not accepting address 52, error -62
[ 1124.793228] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1130.425444] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1130.633480] usb 4-3.1: device not accepting address 53, error -62
[ 1136.057692] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1141.689784] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1141.897802] usb 4-3.1: device not accepting address 54, error -62
[ 1147.321989] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1152.015245] usb 4-1: USB disconnect, device number 3
[ 1152.016251] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[ 1152.016301] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 1152.954252] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1153.162291] usb 4-3.1: device not accepting address 55, error -62
[ 1153.162647] usb 4-3-port1: unable to enumerate USB device
[ 1170.005849] usb 3-1: new high-speed USB device number 12 using xhci_hcd
[ 1170.175958] usb 3-1: New USB device found, idVendor=058f, idProduct=6361
[ 1170.175963] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1170.175965] usb 3-1: Product: Mass Storage Device
[ 1170.175967] usb 3-1: Manufacturer: Generic
[ 1170.175969] usb 3-1: SerialNumber: 058F63616476
[ 1170.176493] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1170.176643] scsi host6: usb-storage 3-1:1.0
[ 1171.195893] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[ 1171.196692] scsi 6:0:0:1: Direct-Access     Multiple Flash Reader     1.05 PQ: 0 ANSI: 0
[ 1171.197684] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1171.198168] sd 6:0:0:1: Attached scsi generic sg2 type 0
[ 1171.877752] sd 6:0:0:0: [sdb] 16007040 512-byte logical blocks: (8.20 GB/7.63 GiB)
[ 1171.878644] sd 6:0:0:0: [sdb] Write Protect is off
[ 1171.878650] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1171.879071] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 1171.879498] sd 6:0:0:0: [sdb] No Caching mode page found
[ 1171.879506] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 1171.884156]  sdb: sdb1
[ 1171.889736] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1172.186366] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1216.444595] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1222.076763] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1222.284746] usb 4-3.1: device not accepting address 56, error -62
[ 1227.709085] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1233.341239] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1233.549193] usb 4-3.1: device not accepting address 57, error -62
[ 1238.973429] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1244.605735] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1244.813708] usb 4-3.1: device not accepting address 58, error -62
[ 1250.237894] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1255.870083] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1256.078096] usb 4-3.1: device not accepting address 59, error -62
[ 1256.078427] usb 4-3-port1: unable to enumerate USB device
[ 1293.759621] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1299.391831] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1299.599817] usb 4-3.1: device not accepting address 60, error -62
[ 1305.024088] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1310.656290] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1310.864268] usb 4-3.1: device not accepting address 61, error -62
[ 1316.288552] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1321.920859] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1322.128813] usb 4-3.1: device not accepting address 62, error -62
[ 1327.552978] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1333.185234] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1333.393209] usb 4-3.1: device not accepting address 63, error -62
[ 1333.393597] usb 4-3-port1: unable to enumerate USB device
[ 1392.579619] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1398.211911] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1398.419823] usb 4-3.1: device not accepting address 64, error -62
[ 1403.844133] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1409.476386] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1409.684278] usb 4-3.1: device not accepting address 65, error -62
[ 1415.108626] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1420.740976] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1420.948797] usb 4-3.1: device not accepting address 66, error -62
[ 1426.373069] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1432.005208] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1432.213244] usb 4-3.1: device not accepting address 67, error -62
[ 1432.213590] usb 4-3-port1: unable to enumerate USB device
[ 1629.132589] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1634.764882] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1634.972768] usb 4-3.1: device not accepting address 68, error -62
[ 1640.397118] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1646.029377] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1646.237202] usb 4-3.1: device not accepting address 69, error -62
[ 1651.661446] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1657.293868] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1657.501697] usb 4-3.1: device not accepting address 70, error -62
[ 1662.925921] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1668.558006] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1668.766013] usb 4-3.1: device not accepting address 71, error -62
[ 1668.766285] usb 4-3-port1: unable to enumerate USB device
[ 1760.209389] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1765.841680] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1766.049644] usb 4-3.1: device not accepting address 72, error -62
[ 1771.473819] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1777.106077] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1777.314076] usb 4-3.1: device not accepting address 73, error -62
[ 1782.738337] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1788.370534] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1788.578492] usb 4-3.1: device not accepting address 74, error -62
[ 1794.002670] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1799.634865] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1799.842914] usb 4-3.1: device not accepting address 75, error -62
[ 1799.843290] usb 4-3-port1: unable to enumerate USB device
[ 1848.628284] sdb: detected capacity change from 8195604480 to 0
[ 1897.942572] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1903.574818] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1903.782804] usb 4-3.1: device not accepting address 76, error -62
[ 1909.207030] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1914.839243] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1915.047244] usb 4-3.1: device not accepting address 77, error -62
[ 1920.471436] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1926.103655] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1926.311665] usb 4-3.1: device not accepting address 78, error -62
[ 1931.735830] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1937.368037] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1937.576111] usb 4-3.1: device not accepting address 79, error -62
[ 1937.576539] usb 4-3-port1: unable to enumerate USB device
[ 1977.305544] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1982.937821] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1983.145763] usb 4-3.1: device not accepting address 80, error -62
[ 1988.570027] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1994.202157] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 1994.410225] usb 4-3.1: device not accepting address 81, error -62
[ 1999.834393] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2005.466667] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2005.674661] usb 4-3.1: device not accepting address 82, error -62
[ 2011.098805] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2016.731434] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2016.939035] usb 4-3.1: device not accepting address 83, error -62
[ 2016.939406] usb 4-3-port1: unable to enumerate USB device
[ 2352.615666] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2358.247995] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2358.455845] usb 4-3.1: device not accepting address 84, error -62
[ 2363.880098] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2369.512295] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2369.720226] usb 4-3.1: device not accepting address 85, error -62
[ 2375.144483] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2380.776698] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2380.984720] usb 4-3.1: device not accepting address 86, error -62
[ 2386.408938] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2392.041125] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2392.249109] usb 4-3.1: device not accepting address 87, error -62
[ 2392.249434] usb 4-3-port1: unable to enumerate USB device
[ 2491.372871] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2497.005067] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 2497.213081] usb 4-3.1: device not accepting address 88, error -62
[ 2499.053147] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 2499.053158] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 2499.053163] usb 4-3-port1: couldn't allocate usb_device
[ 2502.637269] xhci_hcd 0000:00:14.0: Command completion event does not match command
[ 2504.173289] xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
[ 2504.173292] xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
[ 2504.173321] xhci_hcd 0000:00:14.0: HC died; cleaning up
[ 2504.173356] usb 3-1: USB disconnect, device number 12
[ 2504.173456] usb 4-3: USB disconnect, device number 2
[ 2504.255680] usb 3-3: USB disconnect, device number 3
[ 2504.255684] usb 3-3.3: USB disconnect, device number 8
[ 2504.255685] usb 3-3.3.2: USB disconnect, device number 10
[ 2504.355479] xhci_hcd 0000:00:14.0: Slot 15 endpoint 2 not removed from BW list!
[ 2504.355482] xhci_hcd 0000:00:14.0: Slot 15 endpoint 4 not removed from BW list!
[ 2504.355490] usb 3-3.3.3: USB disconnect, device number 11
[ 2504.477333] xhci_hcd 0000:00:14.0: Slot 16 endpoint 2 not removed from BW list!
[ 2504.477336] xhci_hcd 0000:00:14.0: Slot 16 endpoint 4 not removed from BW list!
[ 2504.477528] xhci_hcd 0000:00:14.0: Slot 13 endpoint 2 not removed from BW list!
[ 2504.477533] usb 3-3.4: USB disconnect, device number 9
[ 2504.477600] asix 3-3.4:1.0 enp0s20u3u4: unregister 'asix' usb-0000:00:14.0-3.4, ASIX AX88772 USB 2.0 Ethernet
[ 2504.492469] xhci_hcd 0000:00:14.0: Slot 14 endpoint 2 not removed from BW list!
[ 2504.492664] xhci_hcd 0000:00:14.0: Slot 3 endpoint 2 not removed from BW list!

I am going to try upgrading to FC25 tonight and see if it resolves the issue as I just cannot work due to this and have to reboot my system every 30 mins or so.

Thanks for reading. Any help would be greatly appreciated.