Hi, I've installed Fedora 25 workstation in uefi mode on my dell notebook, but it doesn't boot, I need to choose "one time boot" and select the fedora entry, I've look in the bios, and its setup like it need, so I don't understand why its not boot like. If someone have an ideal
Thanks for your help
Restart the computer. At the Dell logo during restart, tap the F2 key repeatedly until you see Entering Setup in the top right corner of the screen. Depending on the BIOS, you may need to press a key listed at the bottom of the screen to load default settings. For example, F9 on the Inspiron N5110. Press ESC to exit the BIOS, and be sure to select Save and Exit to save your changes. Check Dell Latitude E6410 Manual for more help if needed.
I mean I think E6410 don't have uefi (secure boot) ,
BIOS Information Vendor: Dell Inc. Version: A16
IIRC with new kernels , or and microcode updates , have BIOS updated is advised . to Create USB boot to upgrade bios (DOS) and check if USB boot without reboot , we may look my notes here: http://www.serjux.com/freedos_boot/Cr...
Asked: 2016-12-26 13:24:16 -0600
Seen: 1,495 times
Last updated: Dec 30 '16
Ask Fedora is community maintained and Red Hat or Fedora Project is not responsible for content. Content on this site is licensed under a CC-BY-SA 3.0 license.
You need to select it properly on your bios, Since each bios has different settings it is hard to guest but if uefi is setup you need to choose the boot entry that will be correct for your installation.
I got an Dell latitude E6410 and doesn't have uefi boot options .
In my bios it's setup like in documentation and it work when I use f12 "one time boot menu" but it not start if I don't do that, I've just a blank screen and nothing happend thats weird